- Router ke router : Kabel DTE, Port Serial
- Router ke switch : Kabel Straight, Port FastEthernet (boleh pake Ethernet tapi lebih cepat FastEthernet)
- Switch ke PC : Kabel Straight, Port FastEthernet
- Konektor yang warna merah menggunakan Serial DTE, jadi tidak perlu clock rate.
- (recommended) Sebaiknya menggunakan Routers yang Generic (Router-PT) agar kita tidak perlu menambahkan modul pada komponen router.
- (recommended) Untuk Switches gunakan Generic (Switch-PT)
- Konfigurasi ini menggunakan CLI (command-line interface)
Konfigurasi Router0:
Router>enable
Router#configure terminal
Router(config)#
//setting interface fastethernet
Router(config)#interface fastethernet 0/0
Router(config-if)#ip address 192.168.11.1 255.255.255.240
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
//setting interface serial
Router(config)#interface serial 2/0
Router(config-if)#ip address 192.168.15.1 255.255.255.252
Router(config-if)#no clock rate
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
//setting ip route
Router(config)#ip route 0.0.0.0 0.0.0.0 192.168.15.2
Konfigurasi Router1:
Router>enable
Router#configure terminal
Router(config)#
//setting interface fastethernet
Router(config)#interface fastethernet 0/0
Router(config-if)#ip address 192.168.10.1 255.255.255.240
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
//setting interface serial
Router(config)#interface serial 2/0
Router(config-if)#ip address 192.168.15.2 255.255.255.252
Router(config-if)#no clock rate
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
//setting ip route
Router(config)#ip route 0.0.0.0 0.0.0.0 192.168.15.1
This is dummy text. It is not meant to be read. Accordingly, it is difficult to figure out when to end it. But then, this is dummy text. It is not meant to be read. Period.
ConversionConversion EmoticonEmoticon